CONCRETE PREPARATION & POLISHING DIAMOND TOOLING

BEP1 - Diamond Pucks

• 3" Diameter - 10 Segments
• 16/18, 30/40, 60/80, 120/150 Grits
• 4 Bond Hardnesses
• Available for Terrco®
• Quick Change Design
• Dry or Wet Use

BEP - Diamond Pucks

• Beveled Edge
• 3" Diameter w/Water Feed Hole
• 16/18, 30/40, 60/80, 120/150 Grits
• 4 Bond Hardnesses
• Available for Terrco® and STI®
• Quick Change Design
• Dry or Wet Use

BEP2 - Diamond Pucks

• Beveled Edge
• 3" Diameter - 6 Segments
• 16/18, 30/40, 60/80, 120/150 Grits
• 4 Bond Hardnesses
• Available for Terrco®
• Quick Change Design
• Dry or Wet Use

BEP3 - Diamond Pucks

• Beveled Edge
• 3" Diameter - 4 Segments
• 16/18, 30/40, 60/80, 120/150 Grits
• 4 Bond Hardnesses
• Available for Terrco®
• Quick Change Design
• Dry or Wet Use

CPP - Ceramic Pads

• Beveled Edge
• 30/50/100/200/400 Grits
• Best for tranitioning from Metals to  Resins - removing scratches and reducing polish time
• Specially Designed for a Slow-Wear Rate for Extended Pad Life
• Velcro® Backing for Quick Change
• Quick Change Holder for Terrco® & Husqvarna® available

CCW - Edge Finish/Match to Floor

• 5" & 7" Diameter - 5/8"-11 Threads
• 30/50/100/200/400 Grits
• Remove scratches quickly
• No Swirl Marks
• Available in 5 grit sizes to give concrete polished floors the same finish up to the edge of a wall
• Wet or Dry use, perform better dry

TR2 - 2 Bar Diamond Pads

• 16/18, 30/40, 60/80, 120/150 Grits
• 4 Bond Hardnesses
• Slurry groove for fast, effective removal
• Threaded Universal Attachment
• Fits Most Magnetic Plates
• Dry or Wet Use

• PCD Patterns with a Variety of Segment Configurations
• Large PCD's for Aggressive Removal of Epoxies & Coatings
• Quick Change Design

RIC - Redilock® Instant Change Plates  

• 2 Bar Diamond Segments
• PCD's & Combo Segs w/PCD's
• 6 Bond Hardnesses
• Instant Change

SFC - Syntec® Fast Change Plates  

• 2 Bar Diamond Segments
• PCD's & Combo Segs w/PCD's
• Fast Change Design

LFC - Lavina® Fast Change Plates  

• 1 &  2 Bar Diamond Segments
• Quick Change Design

RPP - Resin Diamond Pads

• 50/100/200/400/800/1500/3000 Grits
• Specially Designed Slow-Wear Rate for Extended Pad Life
• Velcro® Backing for Quick Change

WRP - White Resin Diamond Pads

• 50/100/200/400/800/1500/3000 Grits
• Specially Designed Slow-Wear Rate for Extended Pad Life
• Velcro® Backing for Quick Change

HRP - Hybrid Diamond Pads

• 50/100/200/400/800/1500/3000 Grits
• Combination Metal & Resin Bond
• Specially Designed for a Slow-Wear Rate for Extended Pad Life
• Velcro® Backing for Quick Change

TDP - Terrazzo Diamond Pads

• 3" Diameter Pads formulated with Special Matrix for Terrazzo
• 50/100/200/400/800/1500/3000 Grits
• Spiral Design for More Effective Polishing
• Velcro® Backing for Quick Change

EPP - Electroplated Diamond Pads

• 5", 7", 9" Diameters
• 60/100/150/200/400/600 Grits
• 0.7mm Pad Thickness
• Marble, Concrete Counter Tops, Swimming Pool Interiors
• Shaping and Sanding soft materials like Marble and Pool Plaster.
• Velcro® Backing for Quick Change
• Wet use

PPP - 7" White Resin Pads

• 50/100/200 Grit x 5/8"
• Natural Stone, Concrete, Plaster
• 3mm thick resin for long life.
• Premium grade materials for fast removal.
• Non colored resin leaves no stains or bleeding into plaster.
• Velcro® Backing for Quick Change
• Wet Use

PPP - 7" White Resin Pads

• 50/100/200 Grit x 5/8"
• Natural Stone, Concrete, Plaster
• 3mm thick resin for long life.
• Premium grade materials for fast removal.
• Non colored resin leaves no stains or bleeding into plaster.
• Velcro® Backing for Quick Change
• Wet Use

BWP - 4" Resin Pads

• 50/100/200/400/800/1500/3000 Grits
• All Natural Stone, Eng Stone.
• 2.8mm thick resin for long life.
• High Quality and longer life and higher shine than competitors*
• Velcro® Backing for Quick Change
• Wet Use

DPR - Dual Purpose Diamond Pad

• 7", 9", 11" Diameters
• 50/100/200/400/800/1500/3000 Grits
• Velcro with interchangeable pads for grinding and polishing of concrete, cement overlays, and stone floors. 
• Finish one grit size, pull off and put on the next pad. Eliminates the need to change the entire pad every time.
• Velcro® Backing for Quick Change

BDP - Burnishing Diamond Pads

• 17", 20", 21", 24", 27" Diameters
• 400/800/1500/3000 Grits
• Diamond coated pads for cleaning & polishing a wide range materials:  Natural stone, Engineered stone, Terrazzo, Polished concrete.
• Keep floors clean and shiny, reduce long-term maintenance costs.
• Velcro® Backing for Quick Change

SDC - "S" Diamond Cup Wheel

• 5" & 7" Diameter
• 16/18, 30/40, 60/80, 120/140 Grits
• Special Segments with slurry groove for fast, effective removal 
• Various grits to finish edges to walls, matching larger machine footprints
• Threaded 5/8"-11 or 7/8"-5/8" Hole
• Dry or Wet Use

LDW - "L" Diamond Cup Wheel

• 7" Diameter
• 10/12 Grit for when more aggeressive removal is desired
• Specially Shaped Segments grind quickly while clearing debris 
• Threaded 5/8"-11
• Dry or Wet Use

LDC - 4.5", 5" & 7"

• 20 Grit - Extra Coarse
• Aggressive, Reverse Segments for fast removal and surface preparation
• Vented for Heat Dissipation
• Threaded 5/8"-11 or 7/8"-5/8" Hole
• Dry or Wet Use

ADC - Arrow Diamond Cup Wheel

• 7" Diameter - 30/40 Grit
• 5/8"-11 or 7/8"-5/8" Arbor Hole
• Offset Arrow Segments achieve aggressive grinding for a variety of coatings/removal
• Dry or Wet Use

TSC - 4", 4.5", 5" & 7" Diameter

• "T" Segments remove Epoxy, Paint, and other coatings with ease while yielding longer life
• 5/8"-11 or 7/8"-5/8" Arbor Hole
• Dry or Wet Use

PCW - PCD Diamond Cup Wheel

• 4", 4.5", 5" & 7" Diameters
• 20 pcs Smaller PCD's = Faster Work
• 5/8"-11 Threaded
• Fast, Effective Removal of Thick paint, mastic and epoxy coatings.
• Dry or Wet Use

PCD1 - 4", 4.5", 5", 6", 7"

• 7/8"-5/8" Hole or 5/8"-11 Threads
• 10mm (.394") Segment Height
• 4 Large Embedded PCD's
• Epoxy / Paint Removal
• Wet or Dry Use

PCD2 - 4", 4.5", 5", 6", 7"

• 7/8"-5/8" Hole or 5/8"-11 Threads
• 10mm (.394") Segment Height
• 4 PCD's, 2 Segments
• Epoxy / Paint Removal
• Wet or Dry Use

CCS - 4", 4.5", 5", 7"

• Angled Segments achieve fast and aggressive removal rates
• 5/8"-11 or 7/8"-5/8" Arbor Hole
• Dry or Wet Use

CCD - 4", 4.5", 5", 7" Diameter

• Extra Angled Segments achieve smoother grinding and longer life
• 5/8"-11 or 7/8"-5/8" Arbor Hole
• Dry or Wet Use

CAD - Threaded Adapter

• Add 5/8"-11 threads to 7/8" arbor hole for cup wheel use on a grinder
• Fits 7/8" Arbor Hole
• 2 pcs - thread from front & back to create the threads